There is a sequence wise process to perform the manual REGEN in the machine once you miss the auto-regen process:
- Ensure that the machine is parked in an open and safe area. The parking brake should be engaged, and the gear should be in neutral.
- Check that the engine has started.
- Do not operate the machine (hydraulic lever, throttle or forward/reverse lever etc) during Manual REGEN.
- Once the above conditions are set, press the REGEN Button on the dashboard for 10 seconds. The amber coloured REGEN symbol will blink on the cluster to indicate that Manual REGEN has started.
- If the symbol is not blinking, re-check the above conditions (1-4).
- Once Manual REGEN starts, the engine RPM will increase to 1500 automatically in Backhoe Loaders, telehandlers, compactors and wheeled loaders. RPM goes up to 1800 in skid steer loader machines.
- Once the Manual REGEN is completed, the lamp stops glowing and the machine is ready for normal work. The Manual REGEN process takes up to 60 minutes for completion.
- The process of Manual REGEN may vary for different machines. It is advisable to refer to the operator manual for more details.